Coral

Product support

• How-to videos

  Coral - How to install on a base

  

  Coral - How to install with vehicle belt

  

  Coral - How to install your baby

  

  Coral - How to install on a stroller

  

  Coral - How to remove inlay

  
• Download the manual
• FAQ
  Can I install the Maxi-Cosi Coral with FamilyFix3 on the front passenger seat?

  Yes, you may install the Maxi-Cosi Coral onto the FamilyFix3 on the front passenger seat if that seat has ISOFIX anchor points. VERY IMPORTANT to make sure that the airbag has been deactivated. Most cars do not have ISOFIX anchorages in the front passenger seat.

  Can I install the Coral with only the car's seat belt?

  Yes you can install the Coral by the car seat belt. Please follow the instructions in the user manual or on the product carefully for a secure installation. The Maxi-Cosi Coral is approved according to ECE R129-03 i-Size as universal belted enhanced child restraint system (ECRS). This means belted i-Size.

  What does it mean; Coral is also i-Size when belted installed in a car?

  It means that Coral in belted installation is also approved according to the i-Size testing protocols, just like when it is installed on an ISOFIX base.

  Can I use the Coral on another ISOFIX base?

  The Coral only fits in combination with the FamilyFix3 ISOFIX base.

  Can I wash the baby-hugg inlay and cover of the Coral in my washing machine?

  Yes you can wash both the baby-hugg inlay as the cover of the Coral in your washing machine but at maximum 30 degrees and using a delicate washing program.

  On which stroller does Coral fit

  The Maxi-Cosi Coral fits on all compatible Maxi-Cosi and Quinny stroller frames and a wide range of other brand strollers.

  How can I adjust the height of the safety harness?

  The height adjustment of the safety harness is regulated by means of the baby-hugg inlay. For newborn babies with a maximum lenght of 60 cm the baby-hugg inlay should be used in order to ensure the perfect safety harness height in the shoulder area. For babies with a length as from 61 cm up to 75 cm we recommend to remove the inlay. This way the lying position is lower providing a perfect safety harness height in the shoulder area again.

  How do I remove the Coral from my stroller?

  You can remove the Coral from a stroller by pushing simultaneously on two grey buttons that are located just next to the carrying handle on the side of the car seat and pulling the seat in an upward direction. Please make sure you always place the car seat rearward facing and not forward facing on the stroller. In combination with Maxi-Cosi and Quinny the Coral is very easy to release with one hand thanks to the memory buttons.

  The Maxi-Cosi Coral complies to the i-Size (R129) legislation. What does that mean?

  i-Size (R129) is a new legislation that aims to make car seats even safer than before. i-Size (R129) car seats offer ISOFIX installation, rearward facing travelling up to at least 15 months, and improved safety standards for additional protection for head and neck. To find out more about i-Size (R129) please visit our website: www.maxi-cosi.com

  What accessories are available for the Coral?

  Maxi-Cosi offers these accessories for the Coral: footmuff, summer inlay, rain cover and mosquito net. Please see the Maxi-Cosi website for more information.

  When should I remove the Baby-Hugg inlay from the Coral?

  The baby-hugg inlay is especially developed to offer additional comfort and safety for small babies. A baby outgrows the baby-hugg inlay on average when he/she is taller than 60 cm. You can consequently remove this inlay from the Coral and use it without.

  Why is there a 12KG weight limit on the Coral instruction sticker?

  In i-Size (R129)  child car seats are classified in a length size range, but the legislation also requires to indicate a maximum weight of the baby. The Coral is suitable for babies from birth (40 cm) until 75 cm. The 12kg weight limit on the Coral refers to the 95 percentile weight of a child of 75 cm. This means that only 5% of the children will be over 12kg weight by the time they reach 75 cm.

  What does modular car seat mean?

  Coral is the first modular baby car seat. This means that the soft carrier (carrying element) can be splitted from the safety shell. This way safety in the car is guaranteed, whilst lightweight and ergonomic carrying convenience is provided.

  What is the weight of the soft carrier?

  The soft carrier is 1.7kg.

  Can I use the soft carrier until the 12 kg weight limit for Coral?

  Yes, the soft carrier can be used until the baby outgrows the Coral (>75 cm, or >12 kg).

  Can I easily replace the carrier with a new one or do you have to buy a whole new Coral? Can you buy the parts separately?

  In case of broken or damaged parts or a defect soft carrier the product can be repaired at one of the authorised repair centres. In case it cannot be repaired, the soft carrier can be replaced. In case you have a defect, please contact our consumer care department or your local retailer.

  Can I carry the whole product by means of the retractable soft carrier handles?

  Yes, that is possible and safe.

  What is the length limit of a baby for use of Coral?

  The Coral is designed to welcome babies from 40 cm up to 75 cm (approx. 12 months)

  How can I clean the safety shell of Coral?

  The safety shell can be cleaned using a wet cloth.

  How do I remove the carrier and how do I put it back?

  1. Fold the carrying handle of the safety shell down; 2. Take both carrying handles from the sides of the soft carrier and hold them together in one hand; 3. Press the soft carrier release button on the side of the safety shell in order to unlock the soft carrier; 4. Lift up the soft carrier from the safety shell; 5. When placing the soft carrier back in the safety shell, make sure it locks by means of an audible ‘Click’; 6. The carrying handles of the soft carrier will automatically retract when released; 7. Put the carrying handle of the safety shell in the most forward position towards the baby’s legs until it locks in driving position.

  Are the soft carrier and safety shell separately available?

  Both elements, the soft carrier and the safety shell, make one car seat. At this moment they are not available as separate items. In case of defects or breakage, you can consult our consumer care department.
• Product specifications

  Child age

  0 - 12 M

  Child weight

  0 - 12 kg

  Child length

  40 - 75 cm

  Product weight

  4.7

  Harness positions​​

  1

• Care & maintenance
  Washing instructions

  Removable covers​​

  No

  Repair

  What do I do if my Maxi-Cosi product needs to be repaired?

  If your Maxi-Cosi product fails due to a manufacturing or workmanship defect, we will either send you a replacement part or make a repair free of charge under our 24-month warranty or Lifetime Warranty. This also covers the cost of shipping. If the product cannot be repaired, or if the cost of repairing the item exceeds the cost of a new one, it will be replaced by another Maxi-Cosi of the same model and colour.

   

  If that is not available, it will be replaced by the closest model and available colour. If you made your purchase from a Maxi-Cosi authorized dealer, please take the item back to them to arrange for it to be repaired or replaced free of charge. If you bought it via this website, please get in touch with our customer care team. You’ll need your original purchase receipt and your Lifetime Warranty card if you are claiming under our Lifetime Warranty. If you are claiming under our 24-month warranty, you’ll need your original purchase receipt. Please note that repairs do not extend the warranty.

  What if I need a repair that is not covered under warranty?

  Repairs not covered under warranty include any damage caused by normal wear and tear, accidental damage, malicious damage, negligence, or if you do not follow the guidance set out in the user manual. If you bought the item second-hand you are also unable to claim under warranty.

   

  We’re committed to reducing waste and we want you to enjoy your Maxi-Cosi product for as long as possible. That’s why we offer a repairs service for all our customers. We keep repair costs as low as possible, but prices will vary due to the cost of the materials and the length of time it takes to do the repair. Repair rates can be obtained via your retailer or from our customer care team here. If the repair exceeds the standard rate you will be notified and asked for your authorization before we’ll proceed. We also sell spare parts, including replacement seat covers, which can help you to enjoy using your Maxi-Cosi product for as long as possible.

  How do I send my Maxi-Cosi in for repair?

  It’s easy to send your Maxi-Cosi for a repair. If you bought it from an authorized dealer, take it back to them. If you bought it via this website, please get in touch with our customer care team.. Remember, if you are claiming the repair under our 24-month warranty, you’ll need to show proof of purchase. If you are claiming it under our Lifetime Warranty, you’ll need proof of purchase and your Lifetime Warranty card, which was sent to you after registration. If you need any additional help with returning an item, contact our customer care team via a channel you prefer, find them here: Contact Us

  How long will my repair take?

  We understand that life without your Maxi-Cosi product could be challenging for you and your family. That’s why we do our best to make repairs as quickly as possible. Our typical turnaround time is 2-3 business days, not including:

   

  • Special order parts, which require 7-10 business days.
  • Transit time, which may vary, depending on the destination.

  In some cases, we can get the repair back to you sooner. In rare cases, it may take longer. If you have returned your Maxi-Cosi product to your retailer for the repair, turnaround times may be longer.
• Product registration & warranty
  Product registration

  We offer a standard 24-month warranty. This free warranty takes effect from the date of purchase and there is no need to register. To make a claim, you will simply need your original proof of purchase.

  Register your product online. This way our consumer care team is able to give you the optimal support when you need it.

  Register online

  Warranty

  What is the warranty on my Maxi-Cosi product?

  When you buy a Maxi-Cosi product from our website or your Maxi-Cosi authorized dealer you can be confident that it will reach you in excellent condition. If not, we’ll put it right straight away.

  We promise that if a Maxi-Cosi product ever fails due to a manufacturing defect or workmanship, it will be repaired or replaced without charge, or a spare part will be sent to you.

  If you have an issue with your Maxi-Cosi, please do get in touch with our customer care team..

  
  

  Our standard 24-month warranty

  This free warranty takes effect from the date of purchase and there is no need to register. To make a claim, you will simply need your original proof of purchase.

  What is covered under warranty?

  Our standard warranty covers any manufacturing defects in materials and workmanship when used in normal conditions and in accordance with our user manuals.

  What is not covered by the warranty?

  Items not covered under warranty include any damage caused by normal wear and tear, accidental damage, malicious damage, negligence, or if you do not follow the guidance set out in the user manual.

  Examples of normal wear and tear include:

  • Wheels that have worn down through regular use.
  • The natural fading of colours over extended time and use.
  • Damage to the material as a result or daily use, such as rips, burns, holes, or worn patches.

  As part of our commitment to sustainability, we aim to help you extend the lifecycle of your Maxi-Cosi. So if your Maxi-Cosi product is damaged as a result of normal wear and tear or an accident, you can take advantage of our value for money repair service. We also sell spare parts, including replacement seat covers, to help your Maxi-Cosi product continue to be enjoyed for longer.

  *Please note that repairs do not extend the warranty.  

   

  If your Maxi-Cosi product fails due to a manufacturing or workmanship defect, we will either send you a replacement part or make a repair free of charge under our 24-month warranty. This also covers the cost of shipping. If the product cannot be repaired, or if the cost of repairing the item exceeds the cost of a new one, it will be replaced by another Maxi-Cosi of the same model and colour. If that is not available, it will be replaced by the closest model and available colour.

  If you made your purchase from a Maxi-Cosi authorized dealer, please take the item back to them to arrange for it to be repaired or replaced free of charge. If you bought it via this website, please get in touch with our customer care team.

  You’ll need your original purchase receipt if you are claiming under our 24-month warranty.

  *Please note that repairs do not extend the warranty.  

  How do I make a claim under warranty on my Maxi-Cosi product?

  If you made your purchase from a Maxi-Cosi authorized dealer please take the item back to them to arrange for it to be repaired or replaced free of charge. If you bought it via this website, please get in touch with our customer care team.

  If you are making a claim under the 24-month warranty, you’ll need your original proof of purchase.

  Do I need to register my product?

  We offer a standard 24-month warranty. This free warranty takes effect from the date of purchase and there is no need to register. To make a claim, you will simply need your original proof of purchase.

  Register your product online. This way our consumer care team is able to give you the optimal support when you need it.

  Register online

• Sustainability
  Materials used

  Product Materials breakdown

  Polypropylene - PP ThermoPlastic Vulcanizate - TPV