Pebble Pro

i-Size (R129) is a new legislation that aims to make car seats even safer than before. i-Size (R129) car seats offer ISOFIX installation, rearward facing travelling up to at least 15 months, and improved safety standards for protection of the head and neck.

Yes, you may install the Maxi-Cosi Pebble Pro i-Size on the 3wayFix on the front passenger seat if that seat has ISOFIX anchor points. Most cars do not have ISOFIX anchorages in the front passenger seat. If so, it is VERY IMPORTANT to make sure that the airbag has been deactivated!

The Pebble Pro i-Size does not fit on the FamilyFix, EasyFix or EasyBase 2 as it is complies with the latest car seat safety standards and therefore must be used with a base that falls within this same regulation, including the 3wayFix, BabyFix or FamilyFix One i-Size

Yes you can install the Pebble Pro i-Size using the 3-point car seat belt, just like all other Maxi-Codi baby car seats. The safety level of an installation with a safety belt gives an ECE R44/04 safety performance though, so we recommend to always use the Pebble Pro i-Size on one of the compatible Maxi-Cosi ISOFIX bases, such as the Maxi-Cosi 3wayFix in order to achieve the highest, i-Size (R129) compliant safety performance.

Yes, you may install the Maxi-Cosi Pebble Pro i-Size on the front passenger seat by using the 3-point car seat belt. If you do so, it is VERY IMPORTANT to make sure that the airbag has been deactivated!

The Pebble Pro i-Size is not designed to be installed using a 2-point seat belt system. The car seat may only be installed using a 3-point seat belt system (approved in accordance with the ECE R16 standard) or, preferably, onto one of the compatible Maxi-Cosi ISOFIX bases, such as the Maxi-Cosi 3wayFix, which is attached directly to the ISOFIX anchor points in the car. Installation on an ISOFIX base achieve the highest, i-Size (R129) compliant safety performance.

The carrying handle is part of the safety concept of Maxi-Cosi infant car seats and must always be placed upright when driving. Read the user manual of the car seat. Placing the carrying handle in the upright position protects the child in the event that the car seat rotates towards the back of the rear car seat. The carrying handle also protects against any large objects that might fly through the air near the child. Once the child is securely fastened in the harnesses, his or her head and arms will not hit the carrying handle in the event of an accident.

Yes, the Maxi-Cosi Pebble Pro i-Size can be used in an airplane. The seat has special certification for this purpose (TUV certifitcate).

The baby-hugg inlay of the Pebble Pro i-Size is designed to position your tiny baby so that the harness fits around them more securely and they are kept in more of a lie flat position whilst they are in the very early stages of development. As your little one grows, they may appear to fit more snuggly in the insert, however we can reassure you that this is normal and will keep your baby well protected in the event of an impact. Feedback has shown that the insert is usually removed when your little one is around 60cm tall ( around 4-6 months of age), however this is ultimately at your discretion as a parent and depends on individual circumstances. If you find that your little one still requires head support, you can remove the lower back wedge and keep the head support cushion in place until you feel it is no longer required.

The headrest provides your child with added comfort right after birth. There is no specific age at which the headrest should be removed from the Maxi-Cosi Pebble Pro i-Size car seat. This depends on the size of your child. Once you notice that your child is no longer lying comfortably because his or her head is lying on the ‘roll’, you can remove the comfort headrest from the Maxi-Cosi Pebble Pro i-Size.

Yes you can wash the baby-hugg inlay, comfort headrest and cover of the Pebble Pro i-Size in your washing machine at a maximum of 30 degrees and by using a delicate washing program.

On the back of the Pebble Pro i-Size coming out from the rim you will find two small loops that are attached to the sun canopy. You can pull on these loops to extract the sun canopy and attach it to the carrying handle.

The Maxi-Cosi Pebble Pro i-Size sun canopy is made of black fabric that protects against both sunlight and UV rays.

The height of the safety harness can easily be adjusted from the back of the Pebble Pro i-Size. Just open the storage compartment and simultaneously push the buttons together to adjust the safety harness and comfort headrest.

Maxi-Cosi offers the following accessories for the Pebble Pro i-Size: footmuff, summer cover, rain cover, mosquito net, back seat protector and back seat car mirror. Please see the Maxi-Cosi website for more information: http://www.maxi-cosi.com/products/accessories.aspx

Yes, please contact your local baby specialized store or contact the Maxi-Cosi Customer Care for spare parts and other service related matters.

The Maxi-Cosi Pebble Pro i-Size complies with the new i-Size (R129) legislation which makes it easier for parents to choose the right car seat for their child, thereby minimising premature up-sizing of a car seat. The Maxi-Cosi Pebble Pro i-Size is for babies from birth up to 75 cm tall.

In i-Size (R129) child car seats are classified according to height, but the legislation also requires a maximum weight of the baby. The Pebble Pro i-Size is suitable for babies from birth (45 cm) until 75 cm. The 12kg weight limit on the Pebble Pro i-Size refers to the 95th percentile weight of a child of 75cm. This means that only 5% of the children will be over 12kgs by the time they reach 75 cm.

This topic is subject to a lot of misunderstanding. This is generally said and written out of concern for babies and, in a nutshell, boils down to the fact that a baby car seat such as a Maxi-Cosi Pebble Pro i-Size should not be used excessively. Children should not lie in a fixed position for too long unnecessarily. They must be given the opportunity to develop their motor system and arm, back and neck muscles. As manufacturers of the first car seat for babies in Europe, the Maxi-Cosi, naturally we have been including this in our instructions for many years. So do not place a baby in his or her seat for the entire day for reasons of convenience, but give him or her the opportunity to develop. This also applies to front pack carriers and all other products in which a baby sits, hangs or lies in a stationary position. However, this is not problematic whatsoever when taking a relatively long car journey or holiday trip once in a while. Our advice is as follows: stop once every 2 hours. After all, the baby must also eat and be changed on a regular basis.

You can remove the Pebble Pro i-Size from a pushchair by pushing simultaneously on two grey buttons that are located just next to the carrying handle on the side of the car seat and pulling the seat in an upward direction. Please make sure you always place the car seat rearward facing and not forward facing on the pushchair. In combination with Maxi-Cosi and Quinny pushchairs the Pebble Pro i-Size is very easy to release with one hand thanks to the memory buttons.

The Maxi-Cosi Pebble Pro i-Size fits a large selection of Maxi-Cosi, Quinny and many otherpushchair brands. For more information of the compatible Maxi-Cosi pushchairs, please see the Pebble Pro i-Size product information page on our website www.maxi-cosi.com.